Click on the image to check the artwork
HiOSO Technology Co.,Ltd is one of the leading 4fe + 2fx node type media converter manufacturers, equipped with productive factory, welcome to buy and wholesale 4 ports 100m node type media converter, 4fe 100m + 2 fiber 100m node type media converter, 4rj45 100m + 2 sc 100m node type media converter products from us.
Overview
FC660F Fiber Media Converter supports 2 10/100M fiber ports and 4 10/100M RJ45 ports. It can implement mutual conversion between 10Base-T/100Base-TX twisted pair electrical signal and 100Base-FX optical signal. FC660F can extend the transmission distance of a network from 100m over copper wires to 120Km. With the application of the switching technology and the storing & forwarding technology, this kind of converter supports transmission in dual-fiber multi-mode, dual-fiber single-mode and single-fiber single-mode fibers.
Features
Adaptive 10Mbps and 100Mbps environments, for the convenience of network upgrade;
Efficient built-in switching core, to implement flow control and reduce broadcast packets;
Provide four RJ45 ports, to implement electrical interface backup and multi-user access;
Provide electrical interfaces based on VLAN switch setting, and supporting the connection of users from different units;
Support full-duplex and half duplex transmission modes and capable of automatic negotiation;
Support automatic crossing of twisted pair ports, for the convenience of system debugging and installation;
Support the transmission of extra-long packets (with the maximum length of 1552 bytes);
Support Quality of Service (QoS) and ensuring transmission of VoIP packets;
Support Spanning Tree Protocol (STP) to form a redundant network;
Low power consumption, low heat and capable of stable operation for a long period of time;
Support multiple types of fiber ports such as dual-fiber multi-mode, dual-fiber single-mode and single-fiber single-mode, expanding the requirements of users;
Application
10/100Mbps fast Ethernet long-distance transmission network
Technical Specifications
|
Parameter |
Specifications |
|
Access mode |
10/100Mbps |
|
Standard |
IEEE802.3 10Base-T Ethernet, IEEE802.3u,100Base-TX/FX Fast Ethernet, IEEE802.3x Flow control, IEEE802.1q VLAN, IEEE802.1p QoS, IEEE802.1d Spanning Tree |
|
Wavelength |
850nm/1310nm/1550nm |
|
Transmission distance |
Dual-fiber multi-mode: 2Km; |
|
Port |
4 RJ45 ports, connected to STP/UTP category-5 twisted pair |
|
Conversion mode |
Medium conversion, storing and forwarding mode |
|
MAC address table |
I K |
|
Buffer space |
1Mbit |
|
Flow control |
Full duplex state: flow control; half duplex state: back pressure mode |
|
Delay |
9.6us |
|
Bit error rate |
<1/1000000000 |
|
MTBF |
100,000 hours |
|
LED |
POWER (power), FX1/FX2 LINK/ACT (fiber connection/action) |
|
Power |
DC5V |
|
Power consumption |
3.5W |
|
Operating temperature |
-10~55℃ |
|
Operating humidity |
5%~90% |
|
Storage temperature |
-40~70℃ |
|
Storage humidity |
5%~90% (non-condensing) |
|
Dimensions |
26mm(Height)*70mm(Width)*98mm(Depth) (external power) |
Order Information
|
Model |
Rate |
Mode |
Working Wavelength |
Transmission Distance |
Power |
|
FC660FM2-SC |
10/100 |
Dual-fiber multi-mode |
1310 |
2 |
DC5V |
|
FC660FS20/40/60 -SC |
10/100 |
Dual-fiber single-mode |
1310 |
25/40/60 |
DC5V |
|
FC660FS80/100/120-SC |
10/100 |
Dual-fiber single-mode |
1550 |
80/100/120 |
DC5V |
|
FC660FS-S20/40/60-SC |
10/100 |
Single-fiber single-mode |
1310/1550 |
25/40/60 |
DC5V |
|
FC660FS-S80/100-SC |
10/100 |
Single-fiber single-mode |
1310/1550 |
80/100 |
DC5V |